INDESTRUCTO OUTER TIE ROD END

these are specifically made for people that use their machines! Wherever it may be—in the mountains bouncing off trees, in the swamp with big tires, in the dunes hauling ass—these joints will handle anything you can throw at it.

• All metal, fully adjustable, CNC machined, heat treated assembly, 40-degree angle capable.
• These joints will not bolt onto any factory setup. Custom tie rods are required. These are a direct replacement for any of our Brute Performance tie rods that use a 3/4" outer heim joint.
• All metal CNC machined, heat treated assembly. Serviceable and rebuildable.
• Adjustable design will allow for a fresh new joint every time it is serviced. No plastic liners to wear out.
• Refer to the instructions tab on the website for install and removal procedure, greasing procedure, rebuild procedure, and torque specs.

BOOTS ARE YOUR FRIEND. KEEP YOUR JOINTS SEALED WITH GOOD BOOTS.

• These joints are all metal. Moving metal-on-metal parts need grease to live.
• Moving metal-on-metal parts do not like water or dirt.
• Don’t neglect your moving metal-on-metal parts.
• If you let water or dirt into your joints, you will have expensive paperweights.
• If you let the grease dry up in your joints, you will have expensive paperweights.
• You will have expensive paperweights if you neglect to maintain your metal-on-metal moving parts.

With that disclaimer out of the way, here’s our warranty:

• If you manage to break or bend a joint that has not been neglected, we will send replacement parts.