TERYX "S" 2" BRACKET LIFT KIT

TERYX “S” LIFT KIT

Fits all model years Teryx “S” / Teryx “Sport” models only. Not for use on regular Teryx 800 (non-S models).

Capable of up to 2 inches of added height and 1.5 inches of added down travel. This kit is specifically designed for the “S” model Teryx and will fit correctly on those machines.

• Bolt-in application
• No drilling or modifications required
• Made in the USA with quality hardware
• Powder-coated black brackets
• Provides approximately 1.5 inches of ride height without shock adjustment
• Additional ride height can be achieved by adding preload to the shocks
• 1.5" wheel spacers are not necessary but will complement the lift nicely

DO NOT ADJUST THE PRELOAD OF YOUR SHOCKS unless additional height is desired.

Installation notes are available on the website. If you need more information on how to install 8 bolts and 4 brackets, use the directions for the regular Teryx 800 lift, BP Teryx Ride Improvement Lift Kit, minus the shock adjustment section.

Torque notes:

• IMPACT TIGHT IS TIGHT
• If you must torque the hardware: M12 x 1.25 – 70 ft lbs DRY

Notes:

• This lift kit will not work with aftermarket A-arms or some aftermarket shocks.
• 1.5" spacers are recomended