Product Overview
KRX 1000 1.5" WHEEL SPACERS
Fits:
- Kawasaki KRX 1000—all years and models
Features:
- 1.5-inch wheel spacers
- Set of four
- 17 mm six-point hex lug nuts for the spacers are provided
- Optional splined lug nuts can be added
- These match the splined lug nuts found on most aftermarket wheel applications
- One tool for the wheel and spacer instead of the 17mm hex lug nuts provided
- Forged 12.9 wheel studs
- Correct wheel-stud thread pitch for Kawasaki
Great lightweight option to widen the stance of your machine.
Bolt these onto your hub in minutes.
A couple of uggas on the spacer lug nuts and a couple more for the wheel lug nuts are all you need. Don’t overcomplicate it.
Tight is tight. One small, minuscule dab of Loctite on the studs if you’re really worried that the lug nuts will come loose (which they won’t).
If you use a shitty torque wrench to tighten the lug nuts, slather the studs in Loctite, or don’t know the difference between wet and dry torque, there is a good chance you will strip them. Learn how to tighten things properly, and you will be just fine.
- Yes, we have to say this. Torque wrenches are great when used properly.
- Every instance of overtightening, stripping the studs, or any other damage has been caused by the end user.
If you are worried about hub-centric wheel spacers on a 2,000 lb. off-road machine, find another hobby. Sadly, we have to say this as well. These types of spacers have been—and will continue to be—a great choice for widening the stance of your machine.
