Product Overview
Brute Performance 2" Ride Improvement Bracket Lift Kit
Fits:
-
2012–Current Teryx4
-
2014–Current 2-seat Teryx 750/800
-
For use with stock A-arms only
Does Not Fit:
-
Teryx S (requires a different lift kit)
This lift kit provides the best ride quality possible while retaining the factory A-arms. By relocating the lower shock mounts inward, it increases leverage on the shocks for a noticeably softer ride.
Features:
-
Provides up to 2" of lift
-
Improves ride quality with factory A-arms
-
Relocates lower shock mounts for increased shock leverage
-
Preload adjustment is required to achieve the full 2" of lift
Installation Notes:
-
2022–Current Teryx models use a larger 12mm front lower shock bolt. Verify your front bolt size before ordering.
-
12mm bolt uses a 17mm bolt head (same as the rear)
-
If the front and rear bolt heads are different sizes, you have the earlier 10mm front bolt.
-
-
Installation instructions are available on our website.
-
Extensive bed weight is not recommended. A stiffer rear spring may be needed for heavy loads.
-
It is not necessary to torque the supplied lift hardware. Tightening with a quality impact until secure is sufficient.
Torque Specifications (if desired):
-
Front M10 x 1.50: 40 ft-lbs
-
Rear M12 x 1.75: 70 ft-lbs
Additional Notes:
-
Will not work with arched A-arms or some aftermarket shocks.
-
1.5" wheel spacers are recommended, but not required.
-
Maximum tire size without fender rubbing is a true 28" tire, regardless of brand.
